XP 32-bit Drivers Support for HP Pavilion dv4, Presario CQ45 & Presario CQ40 [Intel Platform]
Date:8/26/2008.

Important Notes:
A.Suggest to copy the all the drivers from the DVD media to a temporary folder on local HDD C: drive
B.You may need to reboot the system after each of the driver installation
c.Ignore the prompt for “Found New Hardward Wizard” dialog box by clicking cancel button.
D. Fn+F4 is not working on Discrete unit but you can toggle LCD via Nvidia control panel

Drivers installation instruction:

Please install the drivers in sequence order by going to the respective folder as below:

1. flash the Bios to F.11C as follow:
a. Copy the all the file from BIOS folder to either a DOS bootable diskette or a DOS bootable Thumbdrive
b. Boot the unit via either a Dos bootable diskette or dos bootable thumbdrive
c. At the DOS command prompt ->type Flash.bat and the unit shutdown after complete the BIOS flashing.

2.MSUAA -> run setup.exe

3.If the unit is using the Intel graphic then install the VGA driver from 3.Intel_VGA-32 folder -> run setup.exe

3.If the unit is using the Nvidia graphic then install the VGA driver from 3.nVidia_VGA folder -> run setup.exe

4.Audio -> run setup.exe

5.Intel_Chipset -> run setup.exe

6.Intel_MSM (Intel Storage matrix manager) -> run Setup.exe

7.LAN (network driver) -> run setup.exe

8.FingerPrint(if the unit has FP module) -> run setup.exe

9.CIR (remote Infra red driver, if the unit has IR module) ->run setup.exe

10.CardReader -> run Setup.exe

11.Modem (modem driver, if the unit has modem module) -> run setup.exe

12.Touchpad -> run setup.exe

13.WLAN (wireless LAN driver) ->run setup.exe

14.BTooth (if the unit has BT module) -> run setup.exe

15.HP3DDG (HDD accelerometer, if the unit has the accelerometer module) -> run setup.exe

16.HPMWWAN (if the unit has WWAN module) -> run setup.exe

17.HPWWANCM (if the unit has WWAN module) -> run setup.exe

18.TV Tunner (if the unit has TV tunner moduel) -> run setup.exe

19.QLB (Quick launch button) -> run SP38688.exe